Texas Scientific Products - By Instrument / Horiba/Jobin-Yvon / All Products

OptiMist® ULTIMATE Nebulizer [15-OPT-ULTIMATE]

Wed, 15 Mar 2023 12:34:09 GMT

OptiMist® ULTIMATE Nebulizer [15-OPT-ULTIMATE]
Buy Now: $994.00

Introducing the OptiMist ULTIMATE nebulizer for ICP-OES.

Designed and built exclusively by Texas Scientific Products, LLC.

FEATURES YOU LOVE

Made from ULTEM®
Huge 1.00mm Sample Channel
Improved Dual Channel (IDC) design
Separate Sample and Gas Delivery Channels
External Aspiration

APPLICATIONS YOU CHAMPION

Petrochemical
Environmental
Industrial

BENEFITS YOU DESERVE

Resistant to HF acid, organic solvents, and any other acid typically used in sample preparation for ICP
Robust handling of samples with large PARTICULATES and HIGH SALT, HIGH TDS
No more clogging!
Precision, sensitivity and detection limits on par with traditional concentric design
Increased productivity; less ICP down-time
Lower operating costs (longer functional life expectancy)

Visit Horiba/Jobin-Yvon to see additional products in this category.

Burgener: Very Low Flow Nebulizer for Single Cell [15-SC-175]

Wed, 18 Mar 2020 10:48:18 GMT

Burgener: Very Low Flow Nebulizer for Single Cell [15-SC-175]
Buy Now: $1,650.00

Very Low Flow designed specifically for single cell analysis for ICP/MS. Sample Capillary: 175 microns. Operates from 5 µl/min to 1 ml/min at a higher pressure: uses 40 psi for 0.65 L/min

Note: This nebulizer’s sample flow rates are much lower than normal for ICP OES.

Visit Horiba/Jobin-Yvon to see additional products in this category.

TSP OptiMist® 070NS Nebulizer [15-OPT-070NS]

Thu, 4 May 2017 14:18:00 GMT

TSP OptiMist® 070NS Nebulizer [15-OPT-070NS]
Buy Now: $664.00

OptiMist® is specifically designed to externally aspirate samples having undissolved particles or extremely high total dissolved solids. Non-concentric sample and gas tubes allow easy removal of blockages should they occur. The OPTIMIST® can be used in place of traditional Babington, V-Groove, cross-flow and GemCone^TM nebulizers. It is interchangeable with concentric type nebulizers and their associated spray chambers.

Please confirm the correct Material and Configuration have been selected. If you have any questions, please contact us at 888-268-6037.

Material: Glass or Quartz. Glass is typically used unless there is a specific application requirement that calls for Quartz.

Configurations: The nebulizer can be ordered from the following configurations:

"Default" - Includes only the nebulizer

"S" - Includes the following items:

Sample line adapter [P/N 16-0001-1]
Push-in fitting for nebulizer gas line [P/N 23-0055]
4mm Nebulizer Argon Flow Adapter [ P/N 23-0029]
Nebulizer Spacer [23-0035]
Applicable to all Spectro ICP's

"PE" - Includes the following items

Nebulizer gas hose adapter 6mm [P/N 16-0009]
Push-in fitting for nebulizer gas line [P/N 23-0055]
White plastic gas hose clamp [P/N 23-0160-1]
Sample line with adapter 1.3mm OD x 0.75mm ID x 700mm [16-0001-1]
Nebulizer Argon gas flow connection for Perkin Elmer ICP [23-0028]
Applicable to all Perkin Elmer ICP's

"TH" - Inclues the following items

Sample line adapter [P/N 16-0001-1]
Push-in fitting for nebulizer gas line [P/N 23-0055]
Applicable to all Thermo ICPs

Visit Horiba/Jobin-Yvon to see additional products in this category.

Spray Chamber - Cyclonic for Horiba/JY

Tue, 10 Feb 2015 16:10:00 GMT

Spray Chamber - Cyclonic for Horiba/JY
Buy Now: $238.35

Cyclonic Spray Chamber, 4mm Drain, for Horiba JY

Horiba/JY OEM #: 31031279

Visit Horiba/Jobin-Yvon to see additional products in this category.

Torch, Fixed, 1.5mm Injector for Horiba JY [10-8010]

Wed, 28 Jan 2015 15:34:00 GMT

Torch, Fixed, 1.5mm Injector for Horiba JY [10-8010]
Buy Now: $245.00

Torch, One Piece Torch 1.5mm Injector with Ball Joint for Horiba JY

Compatible ICP's: Horiba/JY Ultima / Activa Series ICP-OES

Horiba/JY OEM #: 49010100

Other Part #: 30-808-3007; 150-05

Visit Horiba/Jobin-Yvon to see additional products in this category.

Burgener: Mira Mist (PEEK) [15-PMM4000]

Mon, 11 Aug 2014 10:14:00 GMT

Burgener: Mira Mist (PEEK) [15-PMM4000]
Buy Now: $1,150.00

PEEK Mira Mist Nebulizer: Same as the Teflon Mira Mist, but easier to make than the Teflon Mira Mist, so you save a little. Works for most samples, but not concentrated acids, and not some organic solvents. Still has Teflon capillaries for the samples and for the gas. Standard pressure (45 psi), low sample flow, enhanced parallel path design. Can operate on 0.2 ml/min to 2.5 ml/min. Excellent mist, and can handle high level of particulates in sample. Fits regular chambers as a direct replacement for glass concentric nebulizers.

Thermo P/N: 842312051471, 4600356

Perkin Elmer P/N: N0775330

Visit Horiba/Jobin-Yvon to see additional products in this category.

Burgener: Mira Mist 3500 (Teflon) [15-TMM3500]

Mon, 11 Aug 2014 10:14:00 GMT

Burgener: Mira Mist 3500 (Teflon) [15-TMM3500]
Buy Now: $1,250.00

Teflon Mira Mist - Enhanced Parallel Path Teflon Nebulizer.

Can operate on 0.2 ml/min to 2.5 ml/min. Excellent mist, and can handle high level of particulates in sample. Fits regular chambers as a direct replacement for glass concentric nebulizers. Operates on standard pressures of 35 - 45 psi. The Teflon Mira Mist can be used for any liquid.

Salting is very rare, but can occur over long periods of time, especially with high Sodium levels in the solution. Such salting can be cleared easily with a dip in 5 - 10% HF

Perkin Elmer P/N: N0777031

Spectro P/N: 76060541

Visit Horiba/Jobin-Yvon to see additional products in this category.

Burgener: Enhance Parallel Path T2100 (Teflon) [15-T2100]

Mon, 11 Aug 2014 10:14:00 GMT

Burgener: Enhance Parallel Path T2100 (Teflon) [15-T2100]
Buy Now: $1,150.00

T-2100: Huge Sample Capillary: 750 microns / 1/32 inch. Designed as replacement for T2002 and BTN. Essentially unpluggable with un-dissolved particles. Can operate on 0.5 ml/min to 3.0 ml/min. Excellent mist, but not quite as good as Mira Mist, but better than most concentrics. Can handle very high level of particles in sample. Fits regular chambers as a direct replacement for glass concentric nebulizers. Operates on standard pressures of 30 - 45 psi.The T 2100 can be used for any liquid. Salting is very rare, but can occur over long periods of time, especially with high Sodium levels in the solution. Such salting can be cleared easily with a dip in 5 - 10% HF, (Caution: Be careful when handling HF. It soaks into the skin before you feel it burning, and in low concentrations it looks and feels like water.)

Perkin Elmer P/N: N0777033

Spectro P/N: 76060540

Visit Horiba/Jobin-Yvon to see additional products in this category.

TSP OptiMist® XL-070NS Nebulizer [15-OPTXL-070NS]

Mon, 11 Aug 2014 10:14:00 GMT

TSP OptiMist® XL-070NS Nebulizer [15-OPTXL-070NS]
Buy Now: $798.00

Designed andmanufactured by Texas Scientific

Products.OptiMist^® XL Nebulizer with0.70 flow rate at 35 PSI. Extra Large sample channel having insidediameter (ID) of between 1.0 and 2.0mm. Capable of handling samples withparticle sizes up to and beyond 1000µm

Please confirm thecorrect Material and Configuration have been selected. If you have anyquestions, please contact us at 888-268-6037.

Material: Glass or Quartz. Glass is typicallyused unless there is a specific application requirement that calls for Quartz.

Configurations: The nebulizer is available in 4configurations, depending on which ICP you will be using it with. Allconfigurations come with the following:

Sample line adapter [P/N 16-0001-1]
Push-in fitting for Nebulizer gas line [P/N 23-0055]

"G" - includes the following additional itemsand information:

White Plastic Hose Clamp [P/N 23-0160-1]
Hose adapter 6mm [P/N 16-0009]
Applicable to Perkin Elmer 3000 Series ICP
Applicable to all Thermo, Agilent/Varian, Leeman, JY/Horiba ICPs

"PE" - includes the following additional itemsand information:

Nebulizer gas hose adapter 6mm [P/N 16-0009]
Push-in fitting for nebulizer gas line [P/N 23-0055]
White plastic gas hose clamp [P/N 23-0160-1]
Sample line with adapter 1.3mm OD x 0.75mm ID x 700mm [16-0001-1]
Nebulizer Argon gas flow connection for Perkin Elmer ICP [23-0028]
Applicable to all Perkin Elmer ICP's

"S" - includes the following additional items and information:

4mm ID Polyethylene, extended length, nebulizer Argon flow adapter [P/N 23-0029]
Nebulizer Spacer [P/N 23-0035]
Applicable for all Spectro ICPs
Note: formerly known as the “MV”

"AGTH" – includes no additional items, but the following information:

Applicable to all Agilent/Thermo/Analytik Jena

Visit Horiba/Jobin-Yvon to see additional products in this category.

Tube: Quartz Inner and Outer Torch Tubes [10-8001]

Mon, 11 Aug 2014 09:59:00 GMT

Tube: Quartz Inner and Outer Torch Tubes [10-8001]
Buy Now: $220.00

Set of quartz tubes (inner and outer) for JY torch

Compatible ICP's: Horiba/JY 24 / 38 / 138 Series ICP-OES

Horiba/JY OEM#: 31023723; 31023722

Visit Horiba/Jobin-Yvon to see additional products in this category.